FSC 5120 — Hand Tools, Non-edged, Non-powered — 158 New NSNs Established July, 1968

FSC 5120 — Hand Tools, Non-edged, Non-powered — 158 New NSNs Established July, 1968 | ArmyProperty.com

< Previous Month Jun, 1968

Next Month > Aug, 1968

"HAND TOOLS, NON-EDGED, NON-POWERED" category — 158 New NSNs Established in July, 1968

NSN	Nomenclature	Date Established
5120-00-104-8661	VISE,MACHINIST'S	July 02, 1968
5120-00-104-8728	BRUSH,WIRE,FURNACE	July 02, 1968
5120-00-105-3027	REMOVER,SEAL	July 02, 1968
5120-00-105-4579	PULLER,REAR COMPRES	July 02, 1968
5120-00-105-4580	PULLER,MECHANICAL	July 02, 1968
5120-00-105-4617	WRENCH,SPANNER	July 02, 1968
5120-00-105-4618	WRENCH,FILTER RETAI	July 02, 1968
5120-00-105-4619	WRENCH,SPANNER	July 02, 1968
5120-00-105-4620	WRENCH,RING,VALVE	July 02, 1968
5120-00-168-2237	INSERTER,SEAL	July 02, 1968
5120-00-168-2276	DRIVER	July 02, 1968
5120-00-168-2280	PULLER	July 02, 1968
5120-00-168-2282	WRENCH	July 02, 1968
5120-00-168-2283	WRENCH	July 02, 1968
5120-00-168-2284	PULLER,ROLLER BEARI	July 02, 1968
5120-00-168-2288	COMPRESSING TOOL	July 02, 1968
5120-00-168-2289	WRENCH,POT SPRING	July 02, 1968
5120-00-168-2318	DIE,CRIMPING TOOL	July 02, 1968
5120-00-105-7104	REMOVER,BEARING AND	July 04, 1968
5120-00-105-7105	EXTRACTOR,GEAR	July 04, 1968
5120-00-105-7106	EXTRACTOR,CARBON BE	July 04, 1968
5120-00-105-7107	EXTRACTOR,CAMPLATE	July 04, 1968
5120-00-105-7108	BENDING TOOL,TAB WA	July 04, 1968
5120-00-105-7109	EXTRACTOR,ROTOR CAR	July 04, 1968
5120-00-105-7113	EXPANDER,SPRING	July 04, 1968
5120-00-105-7114	WRENCH,MULTI DISC C	July 04, 1968
5120-00-105-7115	PULLER,MECHANICAL	July 04, 1968
5120-00-105-7121	PLIERS,SPACER RING	July 04, 1968
5120-00-105-7122	WRENCH,RETAINING NU	July 04, 1968
5120-00-105-7123	PULLER,OIL STRAINER	July 04, 1968
5120-00-105-7124	PULLER,DOWEL PIN	July 04, 1968
5120-00-105-7125	WRENCH,FUEL NOZZLE	July 04, 1968
5120-00-105-7126	FLARING TOOL,CLINCH	July 04, 1968
5120-00-105-7127	ADJUSTING TOOL,IDLE	July 04, 1968
5120-00-105-7128	ADJUSTING TOOL,LIMI	July 04, 1968
5120-00-105-7129	ADJUSTING TOOL,GOVE	July 04, 1968
5120-00-105-7130	PULLER ASSY,VANE	July 04, 1968
5120-00-105-7132	HANDLE,TORQUE	July 04, 1968
5120-00-105-7138	WRENCH,SERVO CONTRO	July 04, 1968
5120-00-142-5208	WRENCH,SOCKET	July 04, 1968
5120-00-142-5209	INSERTER,BEARING AN	July 04, 1968
5120-00-142-5210	CRIMPING TOOL,TERMI	July 04, 1968
5120-00-167-9164	WRENCH,SPANNER	July 04, 1968
5120-00-168-2345	WRENCH,SOCKET	July 04, 1968
5120-00-168-2348	WRENCH	July 04, 1968
5120-00-168-2351	WRENCH,SOCKET	July 04, 1968
5120-00-168-2352	HOLDER,SPECIAL TOOL	July 04, 1968
5120-00-105-9564	EXTRACTOR,DRIVE GEA	July 09, 1968
5120-00-105-9565	COMPRESSION TOOL,AD	July 09, 1968
5120-00-105-9566	COMPRESSION TOOL,EN	July 09, 1968
5120-00-105-9567	SPANNER TOOL,SERVO	July 09, 1968
5120-00-105-9568	CRIMPING TOOL,MAIN	July 09, 1968
5120-00-105-9569	INSTALLING TOOL,MAI	July 09, 1968
5120-00-105-9572	WRENCH,CAP NUT,RELI	July 09, 1968
5120-00-105-9573	ALIGNING TOOL,GEAR	July 09, 1968
5120-00-105-9574	LOCKING TOOL,PISTON	July 09, 1968
5120-00-105-9578	PUNCH,PEENING	July 09, 1968
5120-00-105-9579	SHEATH,SEAL ASSEMBL	July 09, 1968
5120-00-105-9580	INSERTER,SLEEVE	July 09, 1968
5120-00-105-9581	EXTRACTOR,SLEEVE	July 09, 1968
5120-00-105-9582	SHEATH,SEAL ASSEMBL	July 09, 1968
5120-00-105-9583	DRIVER,SLEEVE	July 09, 1968
5120-00-105-9584	EXTRACTOR,SLEEVE	July 09, 1968
5120-00-105-9585	HOLDER,CUPWASHER	July 09, 1968
5120-00-105-9586	GUIDE,RETAINING	July 09, 1968
5120-00-168-2407	PULLER,FUEL NOZZLE	July 09, 1968
5120-00-168-2416	WRENCH,TORQUE	July 09, 1968
5120-00-168-2420	PULLER,MECHANICAL	July 09, 1968
5120-00-105-3164	SCREWDRIVER ATTACHM	July 11, 1968
5120-00-105-3165	HANDLE,SOCKET WRENC	July 11, 1968
5120-00-105-3324	REMOVAL TOOL	July 11, 1968
5120-00-106-0116	WRENCH,PIN	July 11, 1968
5120-00-106-0820	TURNBUCKLE,CASE FAN	July 11, 1968
5120-00-106-0823	STAKING DIE	July 11, 1968
5120-00-106-0826	SHEATH,SEALING RING	July 11, 1968
5120-00-106-0827	SHEATH,SEALING RING	July 11, 1968
5120-00-106-0828	PUNCH,PEENING	July 11, 1968
5120-00-106-0830	HOLDER,SHAFT GOVERN	July 11, 1968
5120-00-105-5751	VISE,PIN	July 13, 1968
5120-00-106-1794	STRAIGHTENER,FIN	July 13, 1968
5120-00-106-2479	WRENCH SET,RATCHET	July 13, 1968
5120-00-106-2480	SOCKET WRENCH SCREW	July 13, 1968
5120-00-106-2481	RIVETER	July 13, 1968
5120-00-106-2482	WRENCH,COMPRESSOR T	July 13, 1968
5120-00-106-2483	PULLER,PROPELLER SH	July 13, 1968
5120-00-106-2484	PULLER,COMPRESSOR S	July 13, 1968
5120-00-106-2485	PULLER,PROPELLER SH	July 13, 1968
5120-00-106-3172	INSERTER,PREFORMED	July 13, 1968
5120-00-106-3174	ADAPTER,WRENCH,DRAG	July 13, 1968
5120-00-106-3186	DRIVER,SHAFT SEAL	July 13, 1968
5120-00-106-3187	SEAL REMOVER	July 13, 1968
5120-00-142-5142	WRENCH,SPANNER	July 13, 1968
5120-00-779-5372	INSERTION TOOL	July 13, 1968
5120-00-106-4706	WRENCH,SPANNER	July 16, 1968
5120-00-106-4707	WRENCH,SPANNER	July 16, 1968
5120-00-106-4708	WRENCH,SPANNER	July 16, 1968
5120-00-106-4709	WRENCH,SPANNER	July 16, 1968
5120-00-106-4713	REMOVAL TOOL	July 16, 1968
5120-00-106-4721	INSTALLING TOOL,BUS	July 16, 1968
5120-00-106-4723	WRENCH,ADJUSTMENT	July 16, 1968
5120-00-106-4725	WRENCH,SPECIAL	July 16, 1968
5120-00-106-4730	ADAPTER,TORQUE WREN	July 16, 1968
5120-00-106-4732	STAKING TOOL,ROTOR	July 16, 1968
5120-00-106-4734	WRENCH,SPANNER	July 16, 1968
5120-00-106-4735	INSTALLING TOOL	July 16, 1968
5120-00-106-4742	EXTRACTION TOOL	July 16, 1968
5120-00-106-4743	POSITIONER,CRIMP	July 16, 1968
5120-00-168-2495	WRENCH,END CAP	July 16, 1968
5120-00-168-2497	REMOVAL TOOL,CARTR	July 16, 1968
5120-00-106-2463	SCREWDRIVER, FLAT TIP	July 18, 1968
5120-00-106-5972	REMOVAL TOOL,LINER	July 18, 1968
5120-00-167-9029	SOCKET,WRENCH,FACE	July 18, 1968
5120-00-106-2690	FLOAT	July 20, 1968
5120-00-106-2692	EDGER,CONCRETE	July 20, 1968
5120-00-106-4318	SCREW STARTER,HAND	July 20, 1968
5120-00-106-7835	PIN,GUIDE,STUD REMO	July 20, 1968
5120-00-106-7837	WRENCH ASSEMBLY,SOC	July 20, 1968
5120-00-106-7916	WRENCH,BOX AND OPEN	July 20, 1968
5120-00-106-8102	BIT,BARREL NUT	July 20, 1968
5120-00-106-8875	PULLER,CORE	July 20, 1968
5120-00-106-8876	CRIMPING TOOL,QUIL	July 20, 1968
5120-00-106-8877	SPANNER,KEY,TRIRACE	July 20, 1968
5120-00-106-8878	INSTALLING TOOL,SEA	July 20, 1968
5120-00-106-8879	PUNCH,ROCKER LEVER	July 20, 1968
5120-00-106-8880	PULLER,MECHANICAL	July 20, 1968
5120-00-106-8881	ALIGNING TOOL,EJECT	July 20, 1968
5120-00-106-8883	WRENCH,SPANNER	July 20, 1968
5120-00-106-8884	WRENCH,SPANNER	July 20, 1968
5120-00-106-8885	WRENCH,SPANNER	July 20, 1968
5120-00-106-8886	WRENCH,SPANNER	July 20, 1968
5120-00-106-8887	WRENCH,SPANNER	July 20, 1968
5120-00-106-8888	WRENCH,SPANNER	July 20, 1968
5120-00-106-8893	PEENING PUNCH	July 20, 1968
5120-00-106-8894	WRENCH,SPANNER,KEY	July 20, 1968
5120-00-106-8895	EXTRACTOR,TORQUE LE	July 20, 1968
5120-00-106-8897	WRENCH,SPANNER	July 20, 1968
5120-00-107-0050	CLAMP,TWEEZER TYPE	July 23, 1968
5120-00-107-0051	CLAMP,TWEEZER TYPE	July 23, 1968
5120-00-107-1301	DRIFT,BEVEL GEAR BE	July 25, 1968
5120-00-107-1523	BRUSH,CLEANING,ELEC	July 25, 1968
5120-00-107-1524	CRIMPING TOOL,TERMI	July 25, 1968
5120-00-107-1525	DRIFT	July 25, 1968
5120-00-142-5229	WRENCH,SPANNER	July 25, 1968
5120-00-106-4553	SCREWDRIVER,RATCHET	July 27, 1968
5120-00-107-4515	INSTALLING TOOL,FIL	July 27, 1968
5120-00-107-5199	INSERTER,ELECTRICAL	July 27, 1968
5120-00-107-5202	CONTACT POSITIONER,	July 27, 1968
5120-00-107-5206	TOOL,SPRING LOADING	July 27, 1968
5120-00-107-5210	WRENCH SET,ADJUSTAB	July 27, 1968
5120-00-107-5213	DRIFT	July 27, 1968
5120-00-108-2343	HOLDER,DRIVE SHAFT	July 27, 1968
5120-00-108-2347	COMPRESSING TOOL,PA	July 27, 1968
5120-00-168-2608	ROLLER	July 27, 1968
5120-00-106-8926	WRENCH,SOCKET	July 30, 1968
5120-00-107-0037	KEY,SOCKET HEAD SCR	July 30, 1968
5120-00-107-0038	KEY,SOCKET HEAD SCR	July 30, 1968
5120-00-107-0039	KEY,SOCKET HEAD SCR	July 30, 1968
5120-00-107-0055	EXTENSION, SOCKET WRENCH	July 30, 1968

Invalid emails will appear to work, but in reality we will NOT receive them. Please make sure you type it correctly.

User Details

Full Name ^*

Email ^*

Phone ^*

Rank (if applicable)

Organization ^*

Position/Job Title

Order Details

Quantity ^*

Target Price

Payment Method ^*

Delivery Timeframe ^*

Delivery Location/ZIP ^*

Comments

New in the forums

Featured Equipment

Property Accountability

"HAND TOOLS, NON-EDGED, NON-POWERED" category — 158 New NSNs Established in July, 1968

Invalid emails will appear to work, but in reality we will NOT receive them. Please make sure you type it correctly.

User Details

Order Details

*Required fields

Submitting request..

Thank you! Your request has been received. We will be in contact shortly.

About Us

Connections

Policies